Four ways to draft faster in nanoCAD

Fill a series of numbers automatically, apply standard table borders and use other small shortcuts that save time in a drawing.

Four ways to draft faster in nanoCAD

Many small drafting tasks take only a few seconds on their own. When you have a whole table or drawing to finish, tools such as AutoFill can save considerable time.
Save a cell style once and you can apply the same standard borders throughout a table.
Insert sketches directly into table cells and use the note’s context menu to pick values from the drawing.

AutoFill in nanoCAD tables

Use AutoFill to enter a series of numbers in a nanoCAD table.

AutoFill in nanoCAD tables
Figure 1. Filling a series in a nanoCAD table

As in Excel, AutoFill extends a series when you drag the fill handle. In the nanoCAD table editor, the pointer changes to an arrow (Fig. 2).

AutoFill in nanoCAD tables
Figure 2. Fill handle

AutoFill works with numbers and text that ends in a number. To repeat 20, enter it in one cell and drag the handle. To count up, enter 20 and 21 in the first two cells, select both and drag. The editor follows the pattern.

If you already use Excel, the same gesture will feel familiar in nanoCAD.

Table cell styles

Use cell styles to apply borders and other formatting consistently throughout a table.

The process of creating a custom style consists of filling one by one the tabs in the Cell Properties dialog box and then saving the settings in the Styles tab

Cell styles in nanoCAD tables
Figure 3. Cell styles in nanoCAD tables

The name is assigned to the style automatically; the style will not only be available in the Cell Properties dialog box, but also in the Apply a Style command (Figure 4).

Apply Style command
Figure 4. Cell styles available in the Apply Style command

Save frequently used formats as cell styles so you don’t have to rebuild each border by hand.

Adding drawings to table cells

Some tables need a sketch, symbol or diagram in a cell. You can include the geometry directly in the table.

Adding drawings to table cells
Figure 5. A nanoCAD table with an embedded drawing

Insert sketches and diagrams as blocks. Create the block before placing it in the table.

Inserting a block into a table
Figure 7. Inserting a block into a table

Note. Blocks retain their independence and can be edited in the block editor.

In this way, you can embed diagrams, sketches and other graphs in nanoCAD table cells in block form. Cell properties influence the size of the image. The embedded chart moves with the table, allowing you to comfortably model the sheet.

Entering callout text

The callout context menu offers several ways to enter text. Here are the commands that let you reuse values.

Entering callout text
Figure 9. Callout context menu in nanoCAD

Pick from drawing

The command activates the Select value panel, where there are buttons that control interaction with drawing objects. We are interested in the Take properties command (fig. 10), which allows to establish a dynamic link between the object parameter and the call line. When an object parameter is modified, the text of the call line is automatically updated.

 User-defined hatch pattern
Figure 10. Selection of values

Templates

The window-width example shows how a template works.

Select the callout from the previous example, open its context menu, and choose Templates → Add (Fig. 11).

 User-defined hatch pattern
Figure 11: Creation of a template

The next time you start the Note tool and need to add the window width, you can use the template. Specify any object in the drawing and, if you have the Width property, it will automatically appear in the line of the rule. If the object does not have this property, several octagonal characters ("square") will appear on the line

History

The History section shows a list of the most recent text values entered by the user (Figure 12). When values are selected from this element, the relation between the object parameter and the annotation is not reset dynamically.

History Section
Figure 12: History section

You can also keep frequently used text in a list and insert it again from the menu.

Callouts appear throughout engineering drawings. Reusing values saves time and reduces transcription errors.

nanoCAD includes standard callouts and tools for adapting their text to the way you work.

Try nanoCAD with your own projects

Open your own DWG files and see how nanoCAD fits into your work.

Start your free 30-day trial

Related articles

View all articles