Designing mechanical assemblies in nanoCAD Mechanica

Mechanical CAD has come a long way since the drafting board. Follow a conveyor project from 3D parts and assemblies to production drawings and bills of materials.

Automating mechanical product design in nanoCAD Mechanica

From small workshops to large manufacturers, most mechanical engineering firms use CAD. Early CAD replaced the drawing board, pencil, and eraser, but automated little beyond drafting.

The design process still followed the paper workflow. Designers drew 2D views of parts, subassemblies, and assemblies, then compiled them into a drawing package.

Today, a 3D model can serve as the basis for design and manufacturing documents, as well as the workflows used to manage those documents.

Many design offices began with AutoCAD because it was widely available. A broader range of CAD systems is now available.

Established manufacturers already have design and production processes in place. Updating them can be difficult because a software change affects both the engineering team and the budget.

How should a design office organize that work? There is no single answer for every company.

The starting budget matters, as does the ability to improve the tools already in use. The design office must also be able to exchange files and documents with existing and prospective customers, contractors, and subcontractors.

This example follows the design of a conveyor for the food or medical industry, from the initial specification to the drawings and documentation produced in nanoCAD Mechanica.

The design starts with a specification. Table 1 lists the requirements for this conveyor.

Table 1. Extract from the conveyor design specification

– The conveyor must transport empty and filled containers in the food or medical industry.
– A variable-frequency drive controls the conveyor chain speed.
– Loading and unloading height, H: 1,200 ± 50 mm
– Conveyor length, L: 1,200 mm
– Conveying speed, v: 20 ± 5 m/min
– Conveyor chain width: 82.5 mm
– Maximum distributed load, Pmax: 85 kg

Calculate the operating parameters before selecting purchased components. Choose the chain and guides, drive sprocket, idler drum, and support rollers. Determine the center distance, chain length, nominal drive shaft speed, and minimum shaft torque.

Use these values to select the drive components, including the gearmotor. Check that the variable-frequency drive can provide the required range of shaft speeds.

The conveyor has three functional sections.
– The drive section contains the gearmotor, drive shaft, and sprocket.
– The intermediate section provides the required conveying length.
– The tail section carries the idler drum.

Chains such as the Rexnord SSB815-3.25IN (10068058) require no tensioning device, which simplifies the conveyor and improves reliability.

Many suppliers of drive components and fittings provide 3D models on their websites (Figure 2) or on request. Model availability can save time and is worth considering when selecting a part or a supplier.

 3D modeling
Figure 2

A model of a similar part may work if only the material differs. If a supplier has no suitable 3D model, look in the catalog (Figure 3) or request a drawing with overall and mounting dimensions. You can then model the part yourself.

 3D modeling
Figure 3

Mechanica also has a parts library with standard fasteners, structural sections, material data, electric motors, and components for process equipment.

Position the 3D models of the purchased components in model space using the dimensions calculated earlier (Figure 4).

 3D modeling
Figure 4

At less than two meters long, this conveyor can use side panels cut from single sheets. Making the two side panels mirror images simplifies fabrication (Figure 5).

 Sheet-metal modeling
Figure 5

Mechanica offers two ways to model these sheet metal parts.

– Draw a parametric 2D profile with Add Flat Sketch and extrude the section to the required length.

– Draw a parametric 2D sketch and use it to create a sheet metal body.

Model the other sheet metal parts in the same way. Figure 6 shows bracket ABBVG.745312.001, which secures the conveyor support.

 Sheet-metal modeling
Figure 6

Use the parts library for components such as support post ABBVG.723111.002 (Figure 7). The post is an 860 mm length of 12X18H10T steel tube with a 48 mm outside diameter and a 2 mm wall.

nanoCAD library
Figure 7

Combine the supplier models with your custom parts to build assemblies such as support ABVG.301329.001 (Figure 8). Generate the assembly drawing and its bill of materials from that model (Figure 9).

3D model
Figure 8
3D model documentation
3D model documentation
Figure 9

To make it easier to place conveyors alongside one another or other equipment, mount the bearing unit on the non-drive side inside the housing (Figure 10).

3D model
Figure 10

The selected idler drum can turn on a fixed axle between the side panels. This removes the need for two separate bearing units at the infeed. The axle also acts as a spacer to hold the panels at the correct distance.

Flanges stiffen the upper and lower edges of each panel. The top flange is bent at 90° and the lower flange at 45° so wash water drains away.

A single family drawing for panel ABVG.745346.001 can cover future conveyor lengths, such as 1,200, 1,500, and 2,000 mm (Figure 11).

3D model documentation 3D model documentation
Figure 11

Use the shaft design tools to model the drive shaft and idler drum (Figure 12).

Drive shaft models Drive shaft models
Figure 12

With both custom and purchased parts modeled, assemble the complete conveyor (Figure 13).

Conveyor assembly model
Figure 13

Use the sheet format and bill of materials tools to prepare the conveyor documentation (Figure 14).

Conveyor drawing Conveyor drawing Conveyor drawing Conveyor drawing Conveyor drawing Conveyor drawing
Figure 14

This example follows a mechanical assembly from the initial 3D layout through to drawings and bills of materials. Mechanica draws on the same model for each stage and supports standards-based documentation.

Automate mechanical design tasks

Explore the libraries, engineering calculations and drawing tools in nanoCAD Mechanica.

Explore Mechanica

Related articles

View all articles